I will try to group pictures with helpful navigation.> |
It is a really good idea to install the breather hose before the case halves are joined. I finally found a case guard for the drive sprocket area. Last one they had. |
It is nice to see the case joint surface very even at the mouth. |
Those are brand new connecting rods. |
Why? Because, this is what I took out of the engine! |
I sure don't want to be running that on the street! |
See the little inner screw of the cases that some people leave out? I don't. |
Be careful not to damage the case mouth installing it. Take out the two case studs. Use a round shank screwdriver. Use blue locktight. If the screws come loose they will not fall out because of the barrels. |
It is very helpful to have an extra pinion for tightening cams. |